| |

Product Information
About Hytec
HYTEC Home Page
|
IMPORTANT NOTICE: PLEASE BE AWARE THAT
ROGUE EMAILS CLAIMING TO COME FROM HYTEC ELECTRONICS LTD WITH OFFERS
REGARDING MOBILE PHONES AND ACCESSORIES ARE IN
CIRCULATION . PLEASE NOTE HYTEC DO NOT SUPPLY THESE PRODUCTS AND THIS IS
A SCAM. PLEASE CHECK THE FULL NAME AND ADDRESS AND THE TELEPHONE
NUMBER OF THE EMAIL WITH THE CONTENT AT THE TAIL OF THIS INDEX PAGE AND
IF IN ANY DOUBT PLEASE PHONE +44(0)118 9757770 TO VERIFY THE CONTENT.
              
|
Hytec Electronics have been providing control and data acquisition systems solutions for over 25 years.
Our
hardware engineers design and manufacture high specification analogue
and digital instrumentation for the harshest of industrial and research
environments. We build quality designs into modular instruments based
on the stringent standards including CAMAC, VME, VME64x, PCI and
Industry Packs.
|
|
Hytec has upgraded the Remote Emergency Indication Centre (REIC) system software and display hardware at Wylfa Nuclear Power Station in
Anglesey, UK. The system provides monitoring of key reactor parameters
on a separate system to the main data loggers and at remote locations.
The system was implemented using Vsystem Control Toolbox software, Personal Computers interconnected by fibre optic Ethernet and data acquisition was using existing Solartron IMP modules.
Hytec is now supplying it's VME64x
Industry Pack (IP) hot-swap carrier
card hardware to the new
Spallation Neutron Source
(SNS) project in Oak
Ridge, Tennessee in the USA. Our
range of Industry Pack cards including
simultaneous sampling 16 bit ADC's
and DAC's, RS232 and RS485 serial cards,
32 bit scalers and stepper motor cards all come with EPICS divers.
This hardware is in extensive use at the
Paul Scherer Institute's Swiss Light
Source (SLS) and is being evaluated by
the new Diamond Light Source
in Oxfordshire, UK.
|
|
|
|
Consultancy
|
Instrumentation |
Systems |
|
Our software
engineers implement sophisticated system drivers in all the leading
operating systems to support our hardware. Software application
engineers consult, design and implement complex control and data
acquisition solutions.
Our
expertise covers not only new technology systems integrating with
process and management information systems, but also re-configuring and
re-using existing plant interface hardware to enable legacy systems to
live on with the latest generation computer hardware and software
technology.
|
Overview of
Hytec's
stepper motor control and drive system
Hytec introduce
500MHz Flash ADC on single width Industry
Pack -
IP-FADC-8420
Hytec has
recently supplied a special high-power, low noise version of its popular
Stepper Motor Drive System, the SMDS4,
to the SLAC Laboratory in USA.
The particular requirement
was for a system which could drive hybrid four-phase stepper motors down
300-foot long cables without producing appreciable electrical noise.
9010 1U Blade
IOC Input Output Controller
The
9010 is 1U
high rack mounting Input Output Controller with 6 industry pack
slots each with a mini signal conditioning cards, one PMC slot and a PC104+
Celeron 400 processor, with Ethernet network (10/100)MHz, USB, 40GB hard
disc and 512 RAM (1GB compact flash optional). As a system component it is
available as an EPICS IOC running either RTEMS or LINUX, or as an OPC
server. It will also support TCP/IP sockets and HTML web browser access. The
functionality of the IOC is determined by industry packs fitted, these
include ADC, DAC, I/O, Isolated I/O, RS232, RS485, Stepper Motor Controller
and Scaler. In addition a PMC card slot provides access to the wide range of
specialist cards.


Download a copy of the
9010 Brochure
CAMAC
SHARC DSP Industry Pack Carrier/Controller
Industry Packs
Increase the functionality of VME64x with Industry Packs which now include, each the size of a credit card.

| 8401.1 |
IP-ADC-8401 |
8-channel 16bit Simultaneous ADC Industry Pack (+/-10V) |
| 8401.2 |
IP-ADC-8401-L |
8-channel 16bit Simultaneous ADC Industry Pack (+/-5v) |
| 8402.1 |
IP-DAC-8402 |
16-channel 16bit DAC (+/-10V) O/P Industry Pack |
| 8402.2 |
IP-DAC-8402-L |
16-channel 16bit DAC (+/-5V) O/P Industry Pack |
| 8403.1 |
IP-MUXADC-8403.1 |
16-channel (mulitplexed) ADC 20bit accuracy Industry Pack with 1MB RAM |
| 8403.2 |
IP-MUXADC-8403.2 |
16-channel (mulitplexed) ADC 20bit accuracy Industry Pack with 2MB RAM |
|
8408 |
IP-ADC-8408 |
16-channel 12 bit ADC |
|
8411 |
IP-ADC-8411 |
16-channel (simultaneous) ADC 16bit resolution
|
|
8413 |
IP-ADC-8413 |
16-channel (simultaneous) ADC 16bit resolution
(One ADC per input) |
|
8420 |
IP-ADC-8420 |
1-channel 8bit 500MHz
Flash ADC |
|
8505 |
IP-DIO-8505 |
16-channel Buffered Digital I/O Board
|
| 8512 |
IP-SCALER-8512 |
16-channel Scaler 32-bit
18MHz Industry Pack |
|
8513 |
IP-ENCODER-8513 |
4-channel Quadrature Encoder Industry Pack |
| 8515 |
IP-SI-8515 |
8-channel RS-232 UART Industry Pack |
| 8516 |
IP-SI-8516 |
8-channel RS-485 UART Industry Pack |
| 8601 |
IP-STEPPER-8601 |
4-channel Stepper Motor Controller Industry Pack |
Are you using a PC?
The ADEX range of bus extenders cover most of the bus types, for details on the full range
including the latest multi riser card the PCIAGPTX-01 which allows for
up to 2 PCI slots and 1 AGP slot on the same board...ideal for those 2U
chassis applications.

|
New
PCI Express Industry Pack Carrier Board added to
product range.
The
VUC3150
is a VME64x/VME master or slave controller with a high speed USB2 interface.

VME64x
New Carrier Board with DSP

8003 fitted with SHARC DSP Processor
An exciting new range of Analogue and Digital I/O modules
conforming to the VME64x specification has been expanded with the
introduction of of the 8003 Carrier Board fitted with the SHARC DSP
processor.
Fully Hot-Swap capable with auto power-up and using Industry Packs for extra functionality.
Versions available:-
| Module |
SHARC Processor |
FLASH EPROM |
SRAM |
RS232 |
Serial SHARC |
LVDS Links |
|
8003 |
21061(1Mbit RAM) |
1 |
|
|
|
|
|
8003.1 |
21062(2Mbit RAM) |
1 |
|
|
|
|
|
8003.2 |
21061(IMbit RAM) |
2 |
1 |
1 |
2 |
|
|
8003.3 |
21062(2Mbit RAM) |
1 |
|
|
|
6 |
|
8003.4 |
21062(2Mbit RAM) |
2 |
1 |
1 |
2 |
|
View the Hytec VME64x Product Range
New Hytec
product summary available in print or for
download
|
PCI to CAMAC
We have just completed development of our new 5331
PCI bus interface for our popular 1330/1331 CAMAC interface and our
3331 VME interface. Upgrade packages are available for existing
1330/1331/3331 customers.
|
Using VME in a VXI system?
VME-VXI Adaptor now available
|
We now accept and download
order form or call for details.
For information on Hytec products and services please contact:
Click to email
Hytec
This site is best viewed with Internet Explorer Version 6.
Adobe Acrobat is used for many pages, for a free download click

To view price lists Java.VM will be required, for a free download click

 |
HYTEC Head Office
Post : 5 Cradock Road, Reading, Berkshire, RG2 0JT, England.
Phone : +44 (0)118 9757770
Fax : +44 (0)118 9757566
Incorporated in England No 1246940
VAT NO GB 285 2479 27 |
Copyright © 2006 [Hytec Electronics Ltd]. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or
registered trademarks of their respective companies or mark holders.
Send mail to
Webmaster
with questions or comments about this web site.
|