Product Description

This single width CAMAC module consists of two 24–bit output registers with opto–isolated outputs. The module comes with two types of input termination 214–4 Emihus socket (2 x 58 way) giving separate pairs of output wires for each signal, or, 214–6 with Dual 37 way Cannon plugs giving 24 signals, 8 returns plus two pairs of strobe signals. Both output registers may be ’Overwritten’, ’Cleared’ and ’Read’ under CAMAC control. Two pairs of wires provide an input, to supply a LAM on the dataway to indicate new data has arrived and two output signals which give a pulse after a time delay to show the register has been overwritten by CAMAC F16.

The strobes may be used as handshake signals and in the event of a handshake loss F25 may be used to restore it.

Features

• Single width.
• Two sets of 24 bit output registers.
• Each output will sink 10mA at 1V max and withstand 30V DC.
• All outputs can withstand +30V in the “off” state.
• All outputs are opto–isolated from the module. + 750V 1.5kV max.
• All inputs are opto–isolated from the module.
• Two input strobe signals are opto–isolated, and need a 10mA drive sink signal.
• Two true or inverted opto–isolated LAM inputs.
• Nine fully decoded sub–address codes.
• Five fully decoded address codes.