|
Data Acquisition and
Control
Hytec SP 232N
RS232C COMMUNICATIONS UNIT
The HYTEC SP 232N is a single width CAMAC module designed to interface
external devices and systems using an RS232C interface in full duplex mode.
Compatible with NE9047 and previous Hytec SP232 modules.
Two separate 256 byte buffers for transmitted and received data.
Full LAM structure for read, write and error handling.
Switched crystal-controlled baud rates from 300 to 38400 Baud.
Use of repeat-mode Q response for both read and write data.
Selection of word length and parity mode via a control register.
Selection of one or two stop bits via an on-board switch.
Additional control register for fully program-controlled operation.
MECHANICAL SPECIFICATION
Single-width CAMAC module with a 25 way Cannon front panel socket.
TEMPERATURE RANGE
Operating temperature from 0 to +45 degrees C.
POWER REQUIREMENTS
+6V @ 1600 mA
HYTEC Head Office
Post : 5 Cradock Road, Reading, Berkshire, RG2 0JT, England.
Phone : +44 (0)118 9757770
Fax : +44 (0)118 9757566
|
