Hytec Electronics Ltd
Data Acquisition and
Control
6335 PCI Express IP Carrier
Board
The
6335 is an Industry Pack Carrier card for the PCI Express bus, which is becoming
more popular in PC motherboards as an I/O standard. This card is used in a ‘X1’
PCI Express slot and can accommodate two Industry Packs, which can be clocked at
either 8MHz
or 32MHz (individually selected). The PCI Express bus is converted
to a ‘local bus’ by a bridge chip and then this local bus is interfaced to the
Industry Pack (IP) Logic connectors by a Xilinx chip.
The
IP interface supports Memory, I/O, ID and Interrupt access to the Industry Packs
in the same way as is used in the 9010 IOC from Hytec. IP interrupts are mapped
to the PCI Express bus. Driver support is available for both Windows and LINUX
environments.
I/O connections are via SCSI-2 connectors
mounted either on the carrier PCB or on a short cable. This short cable can be
terminated either on an adjacent slot bracket or simply exit from the case
through a slot in the card’s bracket. These I/O connections are compatible with
Hytec’s range of DIN-rail mounted I/O termination and breakout assemblies.
| HYTEC Head
Office Post : 5 Cradock Road, Reading, Berkshire, RG2 0JT, England. Phone : +44 (0)118 9757770 Fax : +44 (0)118 9757566 Email : sales@hytec-electronics.co.uk |
Copyright © 2006
[Hytec Electronics Ltd]. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered
trademarks of their respective companies or mark holders.
Our policy is one of continuous product development and the right is reserved
to supply equipment which may vary slightly from that described.
send mail to paul@hytec-electronics.co.uk
with questions or comments about this web site.