|
Hytec Electronics Ltd |
| Cat No | Name | Description | £ |
|---|---|---|---|
| 1 | NCA1 | NIM-CAMAC Adapter | 135 |
| 4 | MXB4 | 3000-hole Matrix Board with fuse & diode | 84 |
| 12 | BM1 | Single-Width Blank Module Kit | 106 |
| 13 | BM2 | Double-Width Blank Module Kit | 120 |
| 42 | KNOB | Rack-mounting 2-channel Knob Unit with Ethernet/ RS232 | 2120 |
| 50 | DTM4 | Dataway Display & Test module | 673 |
| 70 | AD70 | 8-channel fast Amplifier/Discriminator | 1242 |
| 80 | WG2401 | Single Word Generator with manual LAM | 415 |
| 81.4 | WG2404 | Quad Word Generator with manual LAM with displayed write register | 570 |
| 90 | NT90 | 8-channel NIM-TTL & TTL-NIM converter | 671 |
| 92 | GPS92 | Time-of-day/year clock precise to 10nsec | 2685 |
| 94 | DR94 | Dual Optical/Electrical Repeater | 1296 |
| 95 | PG0003 | Wide-range, crystal-controlled Pulse Generator | 463 |
| 97 | PPG97 | 100Mhz Programmable Pulse-train Generator | 1319 |
| 130 | MA130 | Memory Adapter for RAM140, NADC530, etc | 1342 |
| 140 | RAM140 | 128Kx16 bit RAM module | 509 |
| 142 | RAM142 | 512Kx16-bit RAM module | 1065 |
| 200 | OR200 | 48-channel 150mA/70V O/P Reg. w/handshake | 532 |
| 205 | RO3201 | 32-channel Relay Output Driver, 0.5A/100V | 671 |
| 207 | RO3202 | 32-channel Relay Output Driver, 2A/500V | 694 |
| 210 | OD6401 | 64-channel 125mA/70V O/P Reg. w/handshake | 926 |
| 211 | OD2411 | 48-channel 40mA/30V O/P Reg. w/handshake (Refurbished) | 231 |
| 214 | OOR214 | Opto-isolated (1kV) version of OR200, 5mA | 1226 |
| 218 | OR1084 | 32-channel 40mA Output Register with Veto | 625 |
| 219 | RO3204 | 32-channel Relay Output Driver, c/o 2A/500V | 740 |
| 220 | IR220 | 48-channel Schmitt I/P Reg. +ve or -ve logic | 532 |
| 230 | OIR230 | Opto-Isolated 48-channel Schmitt I/P Reg. +ve or -ve logic | 972 |
| 232 | SP232N | Single Channel RS232 buffered comms.to 38.4KHz | 880 |
| 240 | IG25601 | 256-channel Input Gate, 2 width | 1296 |
| 244 | MSS1601 | 320-channel Change-of-State Scanner, 3 width | 1805 |
| 245 | MTB4001 | 40-channel Matrix Terminator module MSS | 116 |
| 253 | SMC24B | 1-channel Stepper Motor Controller/Driver 5000 PPS | 1528 |
| 258 | SMC2404 | 4-chan. Stepper Controller 24-bit Programmable | 2130 |
| 260.1 | SMDS4-L/R | Four channel Unipolar L/R stepper motor driver (3U rack-mounting) | 1925 |
| 260.4 | SMDS4-B | Four channel bipolar stepper motor driver (3U rack-mounting) | 2189 |
| 260.5 | SMDS4-5P | Four channel bipolar 5 phase stepper motor driver for use with 8601 Industry Pack (3U rack-mounting) | 1992 |
| 260.5 | MDS-8 | Eight channel Motor Drive System | TBA |
| 262 | SMDS4-SHELF | 1U Rack-mounting shelf for 1KVA PSU for L/R driver above | 460 |
| 350 | QPS350 | 4-channel 75Mhz 24-bit Preset Counter | 949 |
| 351 | QPS351 | 4-channel 75Mhz 24-bit Preset Counter (BCD) | 671 |
| 370 | GQPC370 | 4-channel 75Mhz 24-bit Preset Counter - gateable | 949 |
| 375.1 | MCC375A | 12-channel 24-bit 10Mhz RS422 Counter | 1203 |
| 380 | MCC380 | 16-channel 24-bit 10Mhz RS422 Counter | 1296 |
| 382 | MCS728 | 32-channel 24-bit 100Mhz latching scalar with 32K*24 memory | 2153 |
| 390 | UDC390 | Dual 28-bit Displayed Up-Down Counter | 2453 |
| 391 | UDC391 | 8-channel 24-bit Up-Down Counter | TBA |
| 400 | IOR400 | 24-channel Input, 24-channel Output | 740 |
| 440 | IOR440 | 24-channel Input, 32-channel Output I/O Register | 763 |
| 450 | IOR450 | 24-channel Input, 32-channel Output RS422,423 I/O Register | 880 |
| 470.1 | IOR470-1 | 24-channel Input, 32-channel Output HLL/NIM/TTL I/O Register | 926 |
| 470.5 | IOR470-5 | 16-channel Input, 16-channel Output HLL/NIM/TTL I/O Register | 856 |
| 480 | OIR480 | Opto Isolated 24-channel Input, 24-channel Output I/O Register | 1111 |
| 505 | ADC505LC | 16-channel 12-bit Scanning ADC - Cannon Connectors | 1203 |
| 506 | ADC506LC | 32-channel 12-bit Scanning ADC- Cannon Connectors | 1273 |
| 508 | ADC508LC | 32-channel 14-bit Scanning ADC +16 dig I/P -Cannon Connectors | 1690 |
| 510 | ADC1224 | 24-channel 12-bit Program-gain Scanning ADC | 1250 |
| 512 | ADC1232 | 32-channel 12-bit Program-gain Scanning ADC | 1250 |
| 520 | ADC1204 | 4-independent-channel 12-bit 10 uSec ADC | 1296 |
| 521 | ADC521 | 4-independent-chan 12-bit ADC prog. Gain | 810 |
| 528 | N9060 | 12-bit 20us Nuclear ADC (peak digitising) (Refurbished) | 231 |
| 537 | TR537 | 8-indep-chan 8-bit 1.2MHz 4MsampleTR with Prog. Gain | 1898 |
| 538 | TR538 | 8-indep-chan 12-bit 10MHz 4Msample trans rec. | 3935 |
| 552 | C91A | 16x20 Flying Capacitor Scanner - Analog Bin | TBA |
| 554 | BA20 | 20-channel Buffer Amplifier for FCS320 | 1434 |
| 556 | DB20 | 20-way FCS Daughter Board | 277 |
| 557 | FCS320 | 320-channel Flying Capacitor Scanner | TBA |
| 559 | FC20 | 20-channel FC Scanner Card | 1434 |
| 560 | MXD5121 | Multiplexer Driver for FCS256 | 1019 |
| 561 | PS91a | Power Supply for C91a bin | 625 |
| 600 | DAC600 | 2-indep-channel 13-bit DAC, pen-u/d,increment | 625 |
| 620 | DAC620 | 2-indep-channel 12-bit DAC, pen-u/d,increment | 509 |
| 640 | DAC640V | 16-channel 12-bit scanning DAC | 1180 |
| 640.1 | DAC640A | 16-channel 12-bit scanning DAC with 8bit-set outputs | 1226 |
| 640.2 | DAC640I | 16-channel 12-bit scanning DAC with 4-20mA outputs | 1482 |
| 640.3 | DAC640L | 16-channel 12-bit scanning DAC with 16 Lemo connectors | 1319 |
| 645 | DAC645 | 32-channel 12-bit scanning DAC | 1782 |
| 648 | DAC648 | 32-channel 16-bit DAC | 1990 |
| 650 | DAC650 | 2-indep-channel 16-bit DAC, pen-u/d,increment | 1459 |
| 670 | DAC670 | 2-opto-isolated indep-channel 18-bit DAC, pen-u/d,increment | 3819 |
| 700 | VDD700 | 1024x256 point video display driver (Refurbished) | 348 |
| 800 | CCA2 | Type A-2 Crate Controller | 1713 |
| 805 | BHT003 | Simple (plug) terminator | 348 |
| 806 | VS | Optional voltage source for BHT003 | 116 |
| 810 | BT6502 | Displayed (latched) terminator | 1250 |
| 840 | DBE6501A | Differential branch extender | 1898 |
| 900 | SCC2401 | Type L-2 serial crate controller | 1574 |
| 911 | UPA541 | Slave dual fibre-optic u-port adapter | 1042 |
| 912 | UPA542 | Master dual fibre-optic u-port adaptor | 1042 |
| 992 | SHD992 | Serial highway driver | 2222 |
| 1270 | SCA1270 | System crate adapter-ACB to S.C. gateway | 1111 |
| 1283 | MXCTR3 | Executive controller - standard | 1459 |
| 1285 | MXCTR5 | Executive controller - ACB version | 2037 |
| 1290 | BRCPR4-1 | Parallel Branch coupler | 2361 |
| 1294 | EC506 | Optional demand handler | 1042 |
| 1305 | SCTST1 | Time-sharing manual system controller | 1273 |
| 1330 | IBM1330 | CAMAC Personal Computer Interface including Personality Card 5331 | 1411 |
| 1331 | IBM1331 | TURBO CAMAC Personal Computer Interface including Personality Card 5331 | 1851 |
| 1341.1 | LP1341/128 | List Processor with 7trigs. 8K store & 128Kx24 data store | 1828 |
| 1341.2 | LP1341/256 | List Processor with 7trigs. 8K store & 256Kx24 data store | 2013 |
| 1342.1 | LP1342/512 | List Processor with 7trigs. 8K store & 512Kx24 data store | 2060 |
| 1342.2 | LP1342/1024 | List Processor with 7trigs. 8K store & 1Mx24 data store | 2268 |
| 1365.2 | Ether.CC-0.5M | Ethernet Crate Controller with 0.5Mbyte RAM | 2199 |
| 1365.6 | 1365 MK4 | 100 Mbit Ethernet Crate Controller | 2750 |
| 1368 | SCSI 73A-1 | SCSI to CAMAC Crate Controller | 1898 |
| 1375 | 1375 | CAMAC SHARC DSP IP Carrier Board | 2199 |
| 1386.1 | PCI/CC | PCI to CAMAC Crate Controller with 3m cable | 2893 |
| 1386.2 | PCI/CC | PCI to CAMAC Crate Controller with 10m cable | 3055 |
| 1401 | LG2401 | CERN-pattern 064 parallel LAM grader | 810 |
| 1420 | SLG1420 | Serial LAM Grader/Encoder | 786 |
| 1440 | BHC | 24-AWG Branch Highway cable, various lengths | TBA |
| 1802 | RIM1802 | Rack Mounted Plant Interface | 327 |
| 1845 | CL300W | 25-Slot 7U CAMAC Crate Linear PSU, +/-6V @ 15A, +/-12V, 24V @ 3A | 3744 |
| 1846 | CL600W | 25-Slot 7U CAMAC Crate Linear PSU, +/-6V @ 45A, +/-12V, 24V @ 8A | 4255 |
| 1940.1 | EHS1365 | Ethernet Host Software for ECC1365 - OpenVMS AXP version 7.3 & 8.1 | 1099 |
| 1940.2 | EHS1365 | Ethernet Host Software for ECC1365 - SUN SOLARIS version 7.0 | 2314 |
| 1940.3 | EHS1365 | Ethernet Host Software for ECC1365 - Compaq True64 UNIX | 2314 |
| 1940.4 | EHS1365 | Ethernet Host Software for ECC1365 - Red Hat LINUX versions and Scientific Linux 4 | 1099 |
| 1941 | WXP1365 | Windows XP Host Software for ECC1365 with ESONE routines DLL | 1099 |
| 1950 | ECS1331 | ESONE MS Visual C routines for Windows 95/98 for 1331 | 949 |
| 1951 | WNT1330/31 | Windows NT V4 Device Driver for 1330/31 with ESONE Callable Subroutines | 1157 |
| 1952 | WNT1330/31 | Open Vms V7 x PCI Device Driver for 1330/31 with Esone Subroutines | 1157 |
| 1953 | WXP1330/31 | Windows XP WDM Driver for 1330/31 with DOE/ESONE Subroutine API and LabViews Vis | 1157 |
| 1960 | ECS1386 | ESONE MS Visual C routines for Windows 95/98 for 1386 | 1157 |
| 1962 | WNT1386 | Windows NT V4 Device Driver for 1386 with ESONE Callable Subroutines | 1388 |
| 1966 | CATY | Compiled BASIC with embedded CAMAC commands | 763 |
| 1970 | WNT5992 | Windows NT V4 Device Driver for 5992 with ESONE Callable Subroutines | 1890 |
| 1980 | WNT3331 | Windows NT V4 Device Driver for 3331 with DLL interface routines | 1092 |
| 2081 | VDS2081 | 32-bit Data/Address Display & Data Generator. | 854 |
| 2081.1 | VDS2081-R | VME Reset Assurance Module | 496 |
| 2092 | GPS2092 | Event Time Stamp & Time-of-Day/Year Clock | 2205 |
| 2095 | PG2095 | Wide-range Crystal-controlled Pulse Generator. | 590 |
| 2256 | VSMC2256 | 4-channel Stepper Motor Controller. | 1305 |
| 2256.1 | VSMC2256/HC1 | Hand-held controller option for 2256. | 246 |
| 2260 | SMDS-4 | 4 Channel Stepper Motor Drive System | 1409 |
| 2380 | MCS2380 | 64-channel 24-bit 10MHz scaler | 1648 |
| 2382 | EC738 | 32-channel 24-bit, 100MHz with 32K x 24-bit RAM. | 2322 |
| 2383 | EC740 | Time Frame Generator option for 2382. | 1616 |
| 2504 | VFC2504 | 8-channel V-to-F Converter, fast response +/- 0.01%. | 1477 |
| 2508 | MADC2508 | 64-channel 16-bit Scanning ADC with store. | 1461 |
| 2530 | 2530 | 8-channel 13-bit ADC with 8K Memory per channel for Listing/Histogram | 3885 |
| 2535.1 | VTR2535-T-128 | Octal 12 bit 10MHz Word T.R.with 128K Memory. | 2678 |
| 2535.2 | VTR2535-T-512 | Octal 12 bit 10MHz Word T.R.with 512K Memory. | 3134 |
| 2536.1 | VTR-2536-T-128 | Octal 14 bit 10MHz Word T.R.with 128K Memory. | 3528 |
| 2536.2 | VTR-2536-T-512 | Octal 14 bit 10MHz Word T.R.with 512K Memory. | 3969 |
| 2536.3 | VTR-2536-T-4000 | Octal/Quad 14 bit 10MHz Word T.R.with 512K/1M Memory. | 4410 |
| 2537 | VTR2537 | Octal 12-bit 60MHz Transient Recorder with 1M samples/channel Memory | 3187 |
| 2537.1 | VTR2537M | Octal 12-bit 50MHz Transient Recorder with 128M samples/channel Memory | 3422 |
| 2670 | DAC2670 | 2-ch.18-bit opto-iso.DAC, 18-bit ab.accuracy, 4 ranges. | 3308 |
| 2992 | SHD2992 | Serial Highway Driver for CAMAC Serial Highway. | 1657 |
| 3150 | VUC3150 | VME-USB2.0 Controller | 1260 |
| 3150.1 | VUC3150 | VME-USB2.0 Controller with one TigerSHARC chip | 1680 |
| 3150.2 | VUC3150 | VME-USB2.0 Controller with two TigerSHARC chips | 2100 |
| 3330 | VCA3330 | VME-CAMAC Adaptor for IBM1331 CAMAC Crate Controller. | 573 |
| 3331 | VIPER | Personal Computer to VME Interface including Personality Card 5331 | 1736 |
| 3331.1 | CATY-VME | VME Programming tool for 3331 | TBA |
| 3840 | V426/428 | 2+6U cooled 21-slot 548W J1/J2 rk-mnt to CERN spec.V428 | 3554 |
| 3845 | V431/429 | 2+6U cooled 21-slot 750W J1/J2 Jaux rk-mnt to CERN spec.V430 | 4577 |
| 4032 | VVA4032 | VME-VXI Adaptor | 2646 |
| 4300 | NIM300W-L | NIM PSU 7U 12 Slot, CERN +/-6V 17A,+/-12V 3,4A, +/-24V 3,4A, 115VAC 0.5A | 3312 |
| 5004 | QIA5004 | Quad Isolation Amplifier | TBA |
| 5005 | MPS5005 | Power supply for 5401 Isolation Amplifier | TBA |
| 5200 | PCI 5200 | Digital Output Interface with Watchdog Function | 472 |
| 5221 | PCI 5221 | Digital Input Interface | 472 |
| 5331 | PCI 5331 | 5331 PCI Personality card for 1330/ 1331 and 3330/3331 | 262 |
| 5380 | PCI 5380 | Dual Channel Rotary Encoder Interface, 24 bit, Quadrature Signals | 341 |
| 5401 | ISO5401 | 16-channel Analogue Isolation Amplifier - mains powered (11bit +/-10V) | 1654 |
| 5992 | PCI5992 | PCI-CAMAC Serial Highway Driver | 1964 |
| 8001 | VICB8001 | Digital I/O (IP Carrier Board) | 799 |
| 8002 | VICB8002 | Industry Pack Carrier Board | 660 |
| 8003 | VICB8003 | Carrier Board with 21061 DSP chip, Flash EPROM (base unit) | 811 |
| 8003.1 | VICB8003.1 | Carrier Board with 21062 DSP chip, Flash EPROM | 908 |
| 8003.2 | VICB8003.2 | Carrier Board with 21061 DSP chip, 2 Flash EPROM, SRAM, Serial Ports | 918 |
| 8003.3 | VICB8003.3 | Carrier Board with 21062 DSP chip, Flash EPROM and 6 LVDS Links | 1172 |
| 8003.4 | VICB8003.4 | Carrier Board with 21062 DSP chip, 2 Flash EPROM, SRAM, Serial Ports | 1015 |
| 8004 | VCB8004 | Industry Pack Carrier Board with SHARC DSP option | 811 |
| 8005 | VCB8005 | 128 Bit TTL Digital I/O Board | 472 |
| 8201 | VTB8201 | 32-channel Analogue I/O Transition Board | 348 |
| 8202 | VTB8202 | 64-channel Analogue I/O Transition Board | 348 |
| 8204 | VTB8204 | Analogue Input Transition Card with Lemos | 748 |
| 8205 | VTB8205 | Analogue I/O Transition Board | 326 |
| 8207 | VTB8207 | Analogue Input Transition Board 16 x 4/20mA (0.01%) + 16 Nominal Inputs | 551 |
| 8208 | VTB8208 | Analogue Output/Input Transition Board with 22bit high resolution O/P | 612 |
| 8209 | VTB8209 | 4x16 Ch Analogue Diff. Input Transition Board for use with IP-MUXADC-8403 | TBA |
| 8210 | VTB8210 | TCPT Transition Board | 250 |
| 8211 | VTB8211 | ADC IP Transition Board | 243 |
| 8212 | VTB8212 | Multiplexed Analogue Input Transition Board | 380 |
| 8213 | VTB8213 | 32-channel Relay Switch | 391 |
| 8301 | VTB8301 | Isolated Digital Input Transition Board | 417 |
| 8302 | VTB8302 | Digital Input/Output Transition Board | 293 |
| 8303 | VTB8303 | Isolated Digital Output Transition Board | 405 |
| 8304 | VTB8304 | Straight-Through Transition Board | 258 |
| 8305 | VTB8305 | Isolated Digital Input/Output Transition Board | 405 |
| 8306 | VTB8306 | Isolated Digital Input/Output Transition Board with Lemo connectors | TBA |
| 8307 | VTB8307 | Mixed Signal Transition Board | 269 |
| 8308 | VTB8308 | 4-Group Mixed Signal Transition Board | 289 |
| 8353 | VTB8353 | Isolated Digital Output Transition Board (160mm Depth) | 405 |
| 8354 | VTB8354 | Straight-Through Transition Board (160mm Depth) | 258 |
| 8401.1 | IP-ADC-8401 | 8-channel 16bit Simultaneous ADC with transient recorder memory (+/-10V) | 642 |
| 8401.2 | IP-ADC-8401-L | 8-channel 16bit Simultaneous ADC with transient recorder memory (+/-5V) | 642 |
| 8402.1 | IP-DAC-8402 | 16-channel 16bit DAC (+/-10V) O/P with function generator memory | 781 |
| 8402.2 | IP-DAC-8402-L | 16-channel 16bit DAC (+/-5V) O/P with function generator memory | 781 |
| 8402.3 | IP-DAC-8402-U | 16-channel 16bit DAC (+10V) O/P with function generator memory | 781 |
| 8403.1 | IP-MUXADC-8403.1 | 16-channel (mulitplexed) ADC 24bit resolution, 20bit accuracy with 1MB RAM | 662 |
| 8403.2 | IP-MUXADC-8403.2 | 16-channel (mulitplexed) ADC 24bit resolution, 20bit accuracy with 2MB RAM | 728 |
| 8404 | IP-DAC-8404 | 16-channel 16bit DAC | TBA |
| 8408 | IP-ADC-8408 | 16-channel 12bit ADC | 525 |
| 8411 | IP-ADC-8411 | 16 Channel 16 bit ADC | 802 |
| 8413 | IP-ADC-8413 | 16-channel 16bit ADC | 962 |
| 8505 | IP-IO-8505 | Digital I/O Industry Pack | 288 |
| 8506 | IP-IO-8506 | 48-bit Digital I/O Board | 392 |
| 8512 | IP-SCALER-8512 | 16-channel Scaler 32-bit 20MHz Industry Pack | 324 |
| 8513 | IP-ENCODER-8513 | 4-channel Quadrature Encoder Industry Pack | 324 |
| 8515 | IP-SI-8515 | 8-channel UART RS-232 Industry Pack | 267 |
| 8516 | IP-SI-8516 | 8-channel UART RS-485 Industry Pack | 267 |
| 8601 | IP-STEPPER-8601 | 4-channel Stepper Motor Controller Industry Pack | 388 |
| 8805 | VCR8805 | VME64x Crate 4U high 7-slot 400W PSU (horizontal 6U modules) Rack Mtg | 3407 |
| 8810 | VCR8810 | VME64x Crate 8U high 10-slot 600W PSU Rack Mtg | 3361 |
| 8815 | VCR8815 | VME64x Crate 11U high 21-slot dual 600W PSU Rack Mtg | 5270 |
| 8821 | VCR8821 | VME64x Crate 9U 21-slot 1000W PSU Rack Mtg | 3938 |
| 8901 | VDB8901 | DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal (ANALOGUE) | 60 |
| 8901.1 | VDB8901-C | DIN Rail Mounted CERNOX Terminal Board | 78 |
| 8901.2 | VDB8901-TD | DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with LEDs & Transorbs (DIGITAL) | 86 |
| 8901.3 | VDB8901-T | DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with Transorbs (ANALOGUE) | 74 |
| 8901.4 | VDB8901-CC | DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with Constant Current Sources & Display | 108 |
| 8902 | VDL8902 | DIN Rail Mounted Lemo Terminal Board SCSI 50 way to 16/18 Single Pole Lemo Skts | 166 |
| 8902.1 | VDB8902 | DIN Rail Mounted Lemo Terminal Board SCSI 50 way to BNC Skts | 166 |
| 8904 | VDU8904 | DIN Rail Mounted UART Terminal Board | 120 |
| 8906 | VDB8906 | DIN Rail Mounted Interface Block for use with 8601 or 8513 | 182 |
| 8907 | VDB8907 | Isolated DIN Rail Mounted Interface Block for use with 8601 or 8513 | 0 |
| 8909 | VD8909 | Stepper Motor Driver DIN Rail Mounted Module | 404 |
| 8910 | VD8910 | DIN Rail Mounted CERNOX Terminal Board | 231 |
| 8911 | VD8911 | DIN Rail Mounted 16-channel 0-10V Input 0-20mA Sink Output | 716 |
| 8912 | VDC8912 | DC:DC Converter +/-12V 125mA. | 68 |
| 8913.1 | VDB8913-P | Platinum Thermometer DIN Rail Terminal Board | 105 |
| 8913.2 | VDB8913-T | Thermocouple DIN Rail Terminal Board | 331 |
| 8915 | VDB8915 | DIN Rail Mounted Terminal Board SCSIII 68 way to 68 Screw Terminals | 88 |
| 8917 | VSB8917 | Vibration Sensor Board | TBA |
| 8925 | VD8925 | Dual 20way DIN Rail Mounted Terminal Board | 0 |
| 8926 | VD8926 | EDAC 38way DIN Rail Mounted Terminal Board | 0 |
| 8999.1 | I/O Connect Cable | Half pitch 50way male to half pitch 50 way male SCSI2- 1metre cable | 14 |
| 8999.2 | I/O Connect Cable | Half pitch 50way male to half pitch 50 way male SCSI2- 2metre cable | 15 |
| 9010 | IOC Blade | Input Output Controller (Basic Configuration includes 6 x SCB9304) | 2315 |
| 9010.1 | IOC Blade | Input Output Controller (Basic Configuration includes 6 x SCB9304) with MSM800 Processor, USB2 & RS232 control/diagnostic port | 2415 |
| 9202 | SCB9202 | Analogue Output Signal Conditioning Board | 86 |
| 9212 | SMB9212 | Multiplexer Board (for use with VDB8913-P DIN Rail Terminal Board) | 104 |
| 9301 | SCB9301 | Isolated x16 Digital Input Signal Conditioning Board | 104 |
| 9303 | SCB9303 | Isolated x16 Digital Output Signal Conditioning Board | 101 |
| 9304 | SCB9304 | Straight-Through Signal Conditioning Board | 32 |
| 9305 | SCB9305 | Isolated Digital Input x8 Output x8 Signal Conditioning Board | 101 |
| 9307 | SCB9307 | 32bit Isolated Digital Input Signal Conditioning Board | 101 |
| 9308 | SCB9308 | 32bit Isolated Digital Output Signal Conditioning Board | 126 |
| 9912 | SDC9912 | DC:DC Converter +/-12V 125mA. | 68 |
Discount on EHS1365 - 3/5th copies 25%;
6/10th copies 50%; 11th+ copies 70%.
Project or site licences are available.
Maintenance is 20% of the purchase price.
9010 Pricing:- The standard configuration includes 6off Signal Conditioning Board SCB9304. If alternative SCB boards are fitted at time of purchase, prices can be discounted by 60% of the cost of the SCB9304s.
All prices are ex-works and do not include VAT.
We now accept
and
download order form or call for details.
For information on Hytec products and services please contact:
HYTEC Head Office
Post : 5 Cradock Road, Reading, Berkshire, RG2 0JT, England.
Phone : +44 (0)118 9757770
Fax : +44 (0)118 9757566
Copyright © 2008 [Hytec Electronics Ltd]. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders.
send mail to paul@hytec-electronics.co.uk with questions or comments about this web site.
18 January, 2008