Hytec VME Modules

Hytec Electronics for Data Acquisition & Control

tel:+44(0)118 9757770	Home Contact Us Company Profile How to find us
	HYTEC PRODUCTS
Hot Swap VME64x Overview EPICS Drivers Signal Conditioning Boards Industry Packs	The introduction of VME64x resulted in significant enhancements to existing specifications, satisfying the demand for more flexible I/O capability, rugged mechanics with EMC/ESD protection and larger address capability, while at the same time making it easier to use with geographical addressing and Hot-Swap. The *Carrier Board* plugs in from the front of the crate in the normal way. As it is inserted, ESD protection contacts discharge any dangerous voltage safely to earth. The card begins to contact the P1 and P2 connectors and long pre-charge pins provide power to the back-end circuitry to prepare the Hot-Swap logic. While the card is levered into position by the inject/eject handles, the Ht-Swap controller is powering on the card logic and checking the supply rails allowing carrier card replacement without the need to power down. In VxWorks and EPICS systems, our software drivers will automatically re-instate the new hardware. Transition Boards boards provide the connection required for rear I/O functions and allow signal conditioning and plant isolation to be added. All Hytec transition cards use the same inexpensive 50-way SCSI II connector for I/O connection on the rear panel, so that inexpensive, commercially available cables can be used to connect to terminal blocks, such as our 8901 DIN-rail mounted *Terminal Board.* To add to the flexibility of VME64x, we have introduced a number of plug-in cards based on the Industry Pack format. Industry Packs (IP) are about the size of a credit card and provide a range of I/O functions. The IP cards are accommodated on carrier boards such as the 8001/8002/8003 which provide sites for two or four packs. An open specification defines the key characteristics ensuring compatibility between suppliers. An ID PROM includes identification and in some cases calibration data, which makes auto-configuration with application software a possibility. They have connectors that are keyed for ease of installation. Software support is available from Hytec.
	VME64x INSTRUMENTATION

Cat No Name Description Specification

8001 VICB8001 Digital I/O (IP Carrier Board) 8001.html

8002 VICB8002 Industry Pack Carrier Board 8002.html

8003 VICB8003 Carrier Board with 21061 DSP chip, Flash EPROM (base unit) 8003.html

8003.1 VICB8003.1 Carrier Board with 21062 DSP chip, Flash EPROM 8003.html

8003.2 VICB8003.2 Carrier Board with 21061 DSP chip, 2 Flash EPROM, SRAM, Serial Ports 8003.html

8003.3 VICB8003.3 Carrier Board with 21062 DSP chip, Flash EPROM and 6 LVDS Links 8003.html

8003.4 VICB8003.4 Carrier Board with 21062 DSP chip, 2 Flash EPROM, SRAM, Serial Ports 8003.html

8004 VCB8004 Industry Pack Carrier Board with SHARC DSP option 8004.html

8005 VCB8005 128 Bit TTL Digital I/O Board 8005.html

8201 VTB8201 32-channel Analogue I/O Transition Board 8201.html

8202 VTB8202 64-channel Analogue I/O Transition Board 8202.html

8204 VTB8204 Analogue Input Transition Card with Lemos 8204.html

8205 VTB8205 Analogue I/O Transition Board 8205.html

8207 VTB8207 Analogue Input Transition Board 16 x 4/20mA (0.01%) + 16 Nominal Inputs 8207.html

8208 VTB8208 Analogue Output/Input Transition Board with 22bit high resolution O/P 8208.html

8209 VTB8209 4x16 Ch Analogue Diff. Input Transition Board for use with IP-MUXADC-8403 8209.html

8210 VTB8210 TCPT Transition Board 8210.html

8211 VTB8211 ADC IP Transition Board 8211.html

8212 VTB8212 Multiplexed Analogue Input Transition Board 8212.html

8213 VTB8213 32-channel Relay Switch 8213.html

8301 VTB8301 Isolated Digital Input Transition Board 8301.html

8302 VTB8302 Digital Input/Output Transition Board 8302.html

8303 VTB8303 Isolated Digital Output Transition Board 8303.html

8304 VTB8304 Straight-Through Transition Board 8304.html

8305 VTB8305 Isolated Digital Input/Output Transition Board 8305.html

8306 VTB8306 Isolated Digital Input/Output Transition Board with Lemo connectors 8306.html

8307 VTB8307 Mixed Signal Transition Board 8307.html

8308 VTB8308 4-Group Mixed Signal Transition Board 8308.html

8353 VTB8353 Isolated Digital Output Transition Board (160mm Depth) 8303.html

8354 VTB8354 Straight-Through Transition Board (160mm Depth) 8304.html

8805 VCR8805 VME64x Crate 4U high 7-slot 400W PSU (horizontal 6U modules) Rack Mtg 8805.html

8810 VCR8810 VME64x Crate 8U high 10-slot 600W PSU Rack Mtg 8810.html

8815 VCR8815 VME64x Crate 11U high 21-slot dual 600W PSU Rack Mtg 8815.html

8821 VCR8821 VME64x Crate 9U 21-slot 1000W PSU Rack Mtg 8821.html

8901 VDB8901 DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal (ANALOGUE) 8901.html

8901.1 VDB8901-C DIN Rail Mounted CERNOX Terminal Board 8901.html

8901.2 VDB8901-TD DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with LEDs & Transorbs (DIGITAL) 8901TD.html

8901.3 VDB8901-T DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with Transorbs (ANALOGUE) 8901.html

8901.4 VDB8901-CC DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with Constant Current Sources & Display 8901.html

8902 VDL8902 DIN Rail Mounted Lemo Terminal Board SCSI 50 way to 16/18 Single Pole Lemo Skts 8902.html

8902.1 VDB8902 DIN Rail Mounted Lemo Terminal Board SCSI 50 way to BNC Skts 8902.html

8904 VDU8904 DIN Rail Mounted UART Terminal Board 8904.html

8906 VDB8906 DIN Rail Mounted Interface Block for use with 8601 or 8513 8906.html

8907 VDB8907 Isolated DIN Rail Mounted Interface Block for use with 8601 or 8513

8909 VD8909 Stepper Motor Driver DIN Rail Mounted Module 8909.html

8910 VD8910 DIN Rail Mounted CERNOX Terminal Board 8910.html

8911 VD8911 DIN Rail Mounted 16-channel 0-10V Input 0-20mA Sink Output 8911.html

8912 VDC8912 DC:DC Converter +/-12V 125mA. 8912.html

8913.1 VDB8913-P Platinum Thermometer DIN Rail Terminal Board 8913P.html

8913.2 VDB8913-T Thermocouple DIN Rail Terminal Board 8913P.html

8915 VDB8915 DIN Rail Mounted Terminal Board SCSIII 68 way to 68 Screw Terminals

8917 VSB8917 Vibration Sensor Board

8925 VD8925 Dual 20way DIN Rail Mounted Terminal Board 8925.html

8926 VD8926 EDAC 38way DIN Rail Mounted Terminal Board 8926.html

8999.1 I/O Connect Cable Half pitch 50way male to half pitch 50 way male SCSI2- 1metre cable

8999.2 I/O Connect Cable Half pitch 50way male to half pitch 50 way male SCSI2- 2metre cable

9010 IOC Blade Input Output Controller (Basic Configuration includes 6 x SCB9304) 9010.html

9010.1 IOC Blade Input Output Controller (Basic Configuration includes 6 x SCB9304) with MSM800 Processor, USB2 & RS232 control/diagnostic port 9010.html

9202 SCB9202 Analogue Output Signal Conditioning Board 9000SCB.html

9212 SMB9212 Multiplexer Board (for use with VDB8913-P DIN Rail Terminal Board) 9000SCB.html

9301 SCB9301 Isolated x16 Digital Input Signal Conditioning Board 9000SCB.html

9303 SCB9303 Isolated x16 Digital Output Signal Conditioning Board 9000SCB.html

9304 SCB9304 Straight-Through Signal Conditioning Board 9000SCB.html

9305 SCB9305 Isolated Digital Input x8 Output x8 Signal Conditioning Board 9000SCB.html

9307 SCB9307 32bit Isolated Digital Input Signal Conditioning Board 9000SCB.html

9308 SCB9308 32bit Isolated Digital Output Signal Conditioning Board 9000SCB.html

9912 SDC9912 DC:DC Converter +/-12V 125mA. 9000SCB.html

Cat No	Name	Description	Specification
8001	VICB8001	Digital I/O (IP Carrier Board)	8001.html
8002	VICB8002	Industry Pack Carrier Board	8002.html
8003	VICB8003	Carrier Board with 21061 DSP chip, Flash EPROM (base unit)	8003.html
8003.1	VICB8003.1	Carrier Board with 21062 DSP chip, Flash EPROM	8003.html
8003.2	VICB8003.2	Carrier Board with 21061 DSP chip, 2 Flash EPROM, SRAM, Serial Ports	8003.html
8003.3	VICB8003.3	Carrier Board with 21062 DSP chip, Flash EPROM and 6 LVDS Links	8003.html
8003.4	VICB8003.4	Carrier Board with 21062 DSP chip, 2 Flash EPROM, SRAM, Serial Ports	8003.html
8004	VCB8004	Industry Pack Carrier Board with SHARC DSP option	8004.html
8005	VCB8005	128 Bit TTL Digital I/O Board	8005.html
8201	VTB8201	32-channel Analogue I/O Transition Board	8201.html
8202	VTB8202	64-channel Analogue I/O Transition Board	8202.html
8204	VTB8204	Analogue Input Transition Card with Lemos	8204.html
8205	VTB8205	Analogue I/O Transition Board	8205.html
8207	VTB8207	Analogue Input Transition Board 16 x 4/20mA (0.01%) + 16 Nominal Inputs	8207.html
8208	VTB8208	Analogue Output/Input Transition Board with 22bit high resolution O/P	8208.html
8209	VTB8209	4x16 Ch Analogue Diff. Input Transition Board for use with IP-MUXADC-8403	8209.html
8210	VTB8210	TCPT Transition Board	8210.html
8211	VTB8211	ADC IP Transition Board	8211.html
8212	VTB8212	Multiplexed Analogue Input Transition Board	8212.html
8213	VTB8213	32-channel Relay Switch	8213.html
8301	VTB8301	Isolated Digital Input Transition Board	8301.html
8302	VTB8302	Digital Input/Output Transition Board	8302.html
8303	VTB8303	Isolated Digital Output Transition Board	8303.html
8304	VTB8304	Straight-Through Transition Board	8304.html
8305	VTB8305	Isolated Digital Input/Output Transition Board	8305.html
8306	VTB8306	Isolated Digital Input/Output Transition Board with Lemo connectors	8306.html
8307	VTB8307	Mixed Signal Transition Board	8307.html
8308	VTB8308	4-Group Mixed Signal Transition Board	8308.html
8353	VTB8353	Isolated Digital Output Transition Board (160mm Depth)	8303.html
8354	VTB8354	Straight-Through Transition Board (160mm Depth)	8304.html
8805	VCR8805	VME64x Crate 4U high 7-slot 400W PSU (horizontal 6U modules) Rack Mtg	8805.html
8810	VCR8810	VME64x Crate 8U high 10-slot 600W PSU Rack Mtg	8810.html
8815	VCR8815	VME64x Crate 11U high 21-slot dual 600W PSU Rack Mtg	8815.html
8821	VCR8821	VME64x Crate 9U 21-slot 1000W PSU Rack Mtg	8821.html
8901	VDB8901	DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal (ANALOGUE)	8901.html
8901.1	VDB8901-C	DIN Rail Mounted CERNOX Terminal Board	8901.html
8901.2	VDB8901-TD	DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with LEDs & Transorbs (DIGITAL)	8901TD.html
8901.3	VDB8901-T	DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with Transorbs (ANALOGUE)	8901.html
8901.4	VDB8901-CC	DIN Rail Mounted Terminal Board SCSI 50 way to 50 Screw Terminal with Constant Current Sources & Display	8901.html
8902	VDL8902	DIN Rail Mounted Lemo Terminal Board SCSI 50 way to 16/18 Single Pole Lemo Skts	8902.html
8902.1	VDB8902	DIN Rail Mounted Lemo Terminal Board SCSI 50 way to BNC Skts	8902.html
8904	VDU8904	DIN Rail Mounted UART Terminal Board	8904.html
8906	VDB8906	DIN Rail Mounted Interface Block for use with 8601 or 8513	8906.html
8907	VDB8907	Isolated DIN Rail Mounted Interface Block for use with 8601 or 8513
8909	VD8909	Stepper Motor Driver DIN Rail Mounted Module	8909.html
8910	VD8910	DIN Rail Mounted CERNOX Terminal Board	8910.html
8911	VD8911	DIN Rail Mounted 16-channel 0-10V Input 0-20mA Sink Output	8911.html
8912	VDC8912	DC:DC Converter +/-12V 125mA.	8912.html
8913.1	VDB8913-P	Platinum Thermometer DIN Rail Terminal Board	8913P.html
8913.2	VDB8913-T	Thermocouple DIN Rail Terminal Board	8913P.html
8915	VDB8915	DIN Rail Mounted Terminal Board SCSIII 68 way to 68 Screw Terminals
8917	VSB8917	Vibration Sensor Board
8925	VD8925	Dual 20way DIN Rail Mounted Terminal Board	8925.html
8926	VD8926	EDAC 38way DIN Rail Mounted Terminal Board	8926.html
8999.1	I/O Connect Cable	Half pitch 50way male to half pitch 50 way male SCSI2- 1metre cable
8999.2	I/O Connect Cable	Half pitch 50way male to half pitch 50 way male SCSI2- 2metre cable
9010	IOC Blade	Input Output Controller (Basic Configuration includes 6 x SCB9304)	9010.html
9010.1	IOC Blade	Input Output Controller (Basic Configuration includes 6 x SCB9304) with MSM800 Processor, USB2 & RS232 control/diagnostic port	9010.html
9202	SCB9202	Analogue Output Signal Conditioning Board	9000SCB.html
9212	SMB9212	Multiplexer Board (for use with VDB8913-P DIN Rail Terminal Board)	9000SCB.html
9301	SCB9301	Isolated x16 Digital Input Signal Conditioning Board	9000SCB.html
9303	SCB9303	Isolated x16 Digital Output Signal Conditioning Board	9000SCB.html
9304	SCB9304	Straight-Through Signal Conditioning Board	9000SCB.html
9305	SCB9305	Isolated Digital Input x8 Output x8 Signal Conditioning Board	9000SCB.html
9307	SCB9307	32bit Isolated Digital Input Signal Conditioning Board	9000SCB.html
9308	SCB9308	32bit Isolated Digital Output Signal Conditioning Board	9000SCB.html
9912	SDC9912	DC:DC Converter +/-12V 125mA.	9000SCB.html